Aviation Filter Cartridges
With decades of experience and industry-leading technology, we understand the aviation fuel industry. Our engineers develop aviation fuel filtration solutions that ensure high quality standards while meeting all safety and environmental regulations to make sure jet fuel is contaminant free, clean and dry.
Our filter cartridges can be customized depending on the specific need. We focus on solutions.
Aviation Solids Removal
Fuel-Gard® VF-21/22SB Series – Filter Cartridges
Carbon steel structural components- Maximum differential pressure: 75 psi (5.25 kg/cm²)
- Retention ratings available in 2, 5, 10 & 25 microns
- Designed to fit Facet Fuel-Gard 21 & 22 housings
VF-21/22SB Series – Microfilters Data Sheet
FA Series – Microfilter Cartridges
EI 1590 qualified- Retention ratings available in 1, 2, 3 & 5 microns and as CIF versioon
- Designed to fit Facet M housings and MS SuperFlex housings
FA Series Data Sheet
M Series – High Efficiency Pleated Paper Filter Cartridges
High efficiency pleated paper filter cartridges- Micron ratings from 0.5 to 75
- 6” (152.4mm) outside diameter, one piece cartridges available in four nominal lengths
- No special kits needed to install
- Designed to fit Facet M housings and MS SuperFlex housings
M Series Data Sheet
CIF Series – Crushable Incinerable Cartridges
High efficiency pleated paper filter cartridges- Micron ratings from 0.5 to 75
- 6” (152.4mm) outside diameter, one piece cartridges available in four nominal lengths
- Designed to fit Facet M housings and MS SuperFlex housings
CIF Series Data Sheet
M & CIF Series – High Efficiency Dual Media Pleated Paper Cartridges
Recommended maximum operating temperature: 240°F- Maximum differential pressure: 75 psi
- Flow direction: Outside to in
- pH range from 5 to 9
- Single-piece construction
- “Rod Mount” or “Screw base” options available
M & CIF Series Data Sheet
MPI Series – Inside-to-Out Flushing Pleated Paper Filter Cartridges
Flushing filter cartridge- High efficiency pleated paper
- Micron ratings 0.5, 1, 2, 5
- 6” (152.4mm) outside diameter, various nominal lengths
- No special kits needed to install
- Designed to fit Facet HCS & VCS housings
MPI Series Data Sheet
Aviation Coalescer
Fuel-Gard® VF 21/22SB Series – FWS – Coalescers
-
Carbon steel structural components- Designed to fit Facet Fuel-Gard 21 & 22 housings
VF 21/22SB Series – Filter Water Separators Data Sheet
Vertical SuperFlex™ Coalescer Cartridges
-
Provides two-stage coalescing and separation- Recommended maximum operating temperature: 240 ºF (115 ºC)
- Maximum differential pressure: 75 psi (5.17 bar)
- pH range from 5 to 9
- Flow direction: Outside to in
- All metal components coated to protect against corrosion
- Standard gaskets are Buna-N—other materials available on request
SuperFlex™ Coalescer Separator Data Sheet
CM Series
-
Qualified to the 6th Edition of EI 1581 for all category “M”- Multi-layered media for increased solids holding capacity
- Ultra-fine solids removal
- Maximum water coalescence
- Balanced cartridge flow characteristics
CM Series Data Sheet
CAA 5 Series
Qualified to the 6th Edition of EI 1581, Category C- Multi-layered media for increased solids holding capacity
- Ultra-fine solids removal
- Maximum water coalescence
- Balanced cartridge flow characteristics
CAA Series 5 Data Sheet
CM 100 Series
Qualified to the 6th Edition of EI 1581 for all category “M100”- Multi-layered media for increased solids holding capacity
- Ultra-fine solids removal
- Maximum water coalescence
- Balanced cartridge flow characteristics
CM 100 Series Data Sheet
Aviation Separator
SM Series
Qualified to EI 1581, 6th Edition, Category M- Cleanable and reusable
- Superior water barrier
- Designed for balanced flow through cartridge
SM Series Data Sheet
SM 100 Series
Qualified to EI 1581, 6th Edition, Category M100- Cleanable and reusable
- Superior water barrier
- Designed for balanced flow through cartridge
SM 100 Series Data Sheet
SS Series
Synthetic separator cartridges feature a specially developed treated hydrophobic media- Qualified to EI-1581
- Cleanable and reusable
- Superior water barrier
- pH range from 5 to 9
- Designed for balanced fl ow through cartridge
- Maximum recommended operation temperature is 240 ºF (115 ºC)
SS Series Data Sheet
ST Series
Qualified to EI 1581 6th Edition, Category C- Cleanable and reusable
- Synthetic mesh 75 micron
- Designed for balanced flow through cartridge
- Treated metal components for corrosion protection
ST Series Data Sheet
Fuel-Gard® VF 21/22SB Series – Separators
- Carbon steel structural components
- Designed to fit Facet Fuel-Gard 21 & 22 housings
VF 21/22SB Series – Filter Water Separators Data Sheet
Vertical SuperFlex™ – Separator Cartridges
- Provides two-stage coalescing and separation
- Recommended maximum operating temperature: 240 ºF (115 ºC)
- Maximum differential pressure: 75 psi (5.17 bar)
- pH range from 5 to 9
- Flow direction: Outside to in
- All metal components coated to protect against corrosion
- Standard gaskets are Buna-N—other materials available on request
SuperFlex™ Coalescer Separator Data Sheet
Water Barrier
FWB Series – Water Barrier Elements
2″ OD FILTER MONITOR REPLACEMENT CARTRIDGES
- Cutting-edge barrier technology
- Meets EI 1588 2nd edition specification requirements
- Resource-efficient
- Media migration uncertainties resolved
- Compatible Materials
Clay Cartridges
Clay Treater Cartridges
Maximum adsorptive and filtration area- Greatly resists water saturation
- Vibra-packed clay minimizes settling
- Interchangeable with other manufacturer’s bag and canister clay treater cartridges
Clay Treaters Cartridges Data Sheet